Tag: tips

How to prepare for your video interview

Whether you are preparing for your first ever interview on camera or you’ve been filmed a few times before, the prospect of being interviewed, for some, can be a little daunting. Even if you do know what to expect, the most confident and experienced of people can still find themselves stumbling as soon as the camera rolls. If you find yourself a little nervous that’s OK, you’re not alone. However, filming doesn’t have to be a strenuous task and with our guidance we’ll have you speaking confidently on camera in no time.

The purpose of this article is to give you a few quick tips about the filming process so that you don’t just leave your shoot with engaging material but you also enjoy the experience.

First things first: eyeline

Talking head Most corporate, promotional and event video interviews are carried out with the interviewee looking away from the camera rather than into the lens. Unless you are delivering a presentation or presenting a show then this is usually the best way to do it. Without having to look down the lens your interview has already become much easier as you can look directly at the person asking the questions, whether that be the videographer or someone from your own organisation. This approach helps you to forget that the camera is even there. All that it’s really doing is documenting a conversation.

Talk about what you know

It should be safe to assume that you’re being interviewed about a subject that you’re highly knowledgeable about. You will probably be saying things that you regularly talk about in your day to day work. So if there are any questions you’re unsure about, speak up and let your videographer know. Some questions might be better for a colleague!

With these first two points you may find that the interview process is already much easier than you initially thought.

Full sentences please

Now this is where it gtalking head studentets a little trickier. Although we should treat your interview as the “documenting of a conversation” the truth is for most promotional videos this conversation is actually going to be quite one sided. To keep up the pace of your video and deliver the crucial information, we need to cut out the interviewer’s questions so that we only hear you. To make this work, you’ll need to answer the questions in full sentences so that your answer still makes sense when the question is removed. This may involve you repeating the question in your answer.

Here are some examples.

The incorrect method:

INTERVIEWER

Do you enjoy working in video production?

ME

Yes, I do.

This isn’t suitable because if we inserted this into a sequence nobody would know what I was saying yes to!

The correct method:

INTERVIEWER

Do you enjoy working in video production?

ME

I enjoy working in video production because it’s a fast moving industry. It can be competitive and challenging at times, but ultimately it’s very rewarding work.

This answer is much better. Notice how I’ve expanded on my original answer a little bit and as a result it is much more interesting.

Technical matters

There are a few other things to bear in mind before you start filming. If you’ve hired video professionals such as flycreative, you won’t need to worry about the technical side of things. That’s what we’re there for! However, it is good to have some awareness of what we will be doing so it doesn’t surprise you on the day.

We want you to look and sound your best. To achieve this and avoid a costly reshoot we aim to capture the best material possible whilst we’re there. From a technical standpoint there could be a number of reasons why we might need to stop, solve an issue and repeat the question again. Our lighting might need adjusting or our microphones may be picking up a loud conversation outside the room otalking head wwtwr humming from the air con. We may ask you to repeat your answer but shorten it slightly, rephrase it to avoid repetition of certain words or allow a slightly bigger gap between the question and your answer so nobody is talking over each other. Sometimes it’s good just to have options when it comes to the edit. If your videographer does intervene, don’t worry, this is perfectly normal.

 

Practice makes perfect

Because filming can require a bit of setup time, you can actually use this to your advantage. If you allow yourself enough time whilst the videographer is setting up you can actually practice what you’re going to say before the camera rolls. Even if they are operating alone and are asking the questions themselves, they will still need to test their audio levels, so this is your time to practice and to talk with them about your answers. You’ll soon feel at ease.

Example interviews

If you still need a bit of reassurance, why not see how others have done it? In our Signature Airlines promo we shot multiple interviews and achieved a fast paced, informative video through applying these techniques. It may not be obvious, but the majority of the people in this video had never been filmed before!

For the purposes of the edit (e.g. pacing) your full interview may not make it into the final video. This shouldn’t alarm you; usually there isn’t enough time to feature everything in a 3 minute video! Being concise and to the point is key and our Signature Airlines video demonstrates this perfectly.

Ready to do your interview?

Remember that the beauty of video production is that you can always stop and answer your question again. There’s no need to worry, even professional actors rarely nail it on the first take!

Now that you’re armed with these tips you can relax and go into your interview feeling like a pro.

To find out more about getting a professional video made for your business drop us a line today.

 

Tips for improving the audio in your video

The first tell tale sign of a video amateur is bad audio. It doesn’t matter how beautiful your images are, how long your steadicam shot is or how interesting your talent is; if your audience is struggling to hear the content they probably won’t give you the time of day. As sound is half of the picture it is crucial that video producers get their audio knowledge up to scratch.

So, what are some of the common causes of bad sound and how could we solve these issues?

Poor location choice

Can you rely on the natural light alone?

A thorough reccie will allow you to (somewhat) find out if you’ll be disturbed during filming

Background noise is probably the biggest problem when it comes to clean sound recording. Where ever we go, whether that be in the city or the countryside, some sort of background noise will try to interfere with our recordings. This could include traffic noise, chatter, sirens, aircraft, footsteps, air conditioning..and the list goes on.

 

 

 

Solution: If you are fortunate enough to do a location reccie, consider the audio elements as well as the visual. Filming under flight paths, by main roads, next to the staff room etc. should all be avoided where possible. If your location looks great but you’re going to be interrupted every 2 minutes, is it really the best place to film? Consider what time of day may be best to do the recording; if the office empties out at lunch time, why not film then? Also, turn off any appliances and equipment that you’re allowed to if they emit unwanted noise. It all goes back to a little foresight and planning before your shoot.

Poor acoustics

Recording in wide open rooms with hard floors and few furnishings can make your recordings sound reverberated. While it is easy to add reverb in post, it is much harder to remove it from a recording. Acoustically treated rooms sound much better to the listener, particularly if recording voice overs.

Solution: Where possible try to shoot in rooms with soft furnishings. Consider using old carpet to reduce the reverb somewhat and this will also reduce any sounds of footsteps. If recording voice overs, either use a studio that has been sound proofed, or set up carpet and pop shields close to the artiste to treat their voice as much as possible.

Unsuitable microphone choice & placement

Sometimes it's good to have options

Sometimes it’s good to have options

You can still record good sound if there is some background noise, but how manageable that noise is all falls down to your choice of microphone. Using the inbuilt mic on your camera is rarely the best option. These mics are often of lower quality, have poor bass response and aren’t usually that directional. High quality shotgun mics may be good alternatives but even those with the most directional pickup patterns can’t completely eliminate some background noise. Lapel mics can also be a good choice but if your subject moves a lot expect to hear a lot of rustling. You also might have trouble attaching a lapel on certain outfits!

Solution: Only ever use your camera’s inbuilt mic for reference so that you can get rid of that tinny sound and reduce the likelihood of any handling noise. Shotgun mics can be great on location, but consider whether having one attached to your camera is going to get the clearest recording or if you need to get it in closer to the subject and purchase a ‘deadcat’ or ‘fluffie’ to eliminate wind noise if you are on location. If using a radio mic, attach stickies and under/over covers to eliminate wind and clothing noise. If possible, find somewhere to attach your mic where there is less chance of your audio becoming muffled  – under a tie or a shirt collar for example. If you have the luxury of both a shotgun and radio mic, record using both into separate channels so you have options! Lastly, if your camera has AGC (automatic gain control), for Pete’s sake turn it off!

Imperfect recording technique

There are numerous ways that your recording technique can affect the quality (or lack of) in your recordings. Turning your microphone’s gain up so high that there is distortion and choosing a mic input when you should be using line are both suitable examples.

Solution: Different equipment manufacturers and sound recordists will have their own opinions on what is a safe level to record at. Some may recommend your maximum recording level hit -18db as it peaks, but some may prefer it to be closer to -12db or even -6db (which is a little dangerous for my liking). It’s important to remember that once a microphone distorts it is pretty much impossible to recover, whereas sound that is recorded slightly too quietly can always be amplified. However, recording as close to your devices’ nominal level is best as too low a level will result in amplification of hiss. This page from the Final Cut Pro user guide explains it well but basically you’ll want to use microphone and recorder combinations with the lowest signal to noise ratio possible. Before you buy any audio equipment do your homework first and look out for comments made by other users regarding this.

One way I found to get a cleaner radio mic recording into my C100 was to select line input in and turn up the output of the receiver quite high

One way I found to get a cleaner radio mic recording into my C100 was to use a line input in and turn up the output of the receiver

One thing to remember is that recording into a designated audio recorder rather than a camera will in most cases give you the cleanest audio as some cameras have quite noisy preamps. On location this might not always be practical but in an acoustically treated studio this is definitely the best method. Either way it is always good to test and get to know your equipment before you go out on a shoot to see how you can get the cleanest recordings possible.

 

 

Insufficient mixing & EQ

audio waveformIs the music drowning out the dialogue? Does your subject become lost amongst the layers of foley? Recording good sound at the outset is important but mixing and equalizing that sound appropriately is just as important in order to produce a product that people want to listen to.

 

 

Solution: Check your levels using the audio meters in your editing program on both your speakers and through a set of headphones. You may notice things through your headphones that you didn’t notice otherwise.  Experiment with EQ and see if you can make any improvements, continually referring back to the original audio. Maybe you’ll discover something, maybe you won’t, but there’s no harm in trying things out. Use fade ins and fade outs where possible so that no source jars when it starts or stops. Find out more about EQ here.

Too much noise reduction

Ever watched a video that sounds like it was made underwater? If so, one cause of this is too much or inappropriately applied noise reduction in post. It sounds bad; worse than most cases of background noise!

Solution: Get it right at the recording stage – do what you can to reduce the background noise. If this isn’t entirely possible, utilize noise reduction and other plugins such as high pass filters to eliminate certain frequencies. The latter cuts off all frequencies below a certain level, allowing the higher frequencies to pass through which can be good for consistent low level noise from an appliance for example. With this and any audio filter be prepared to spend time tinkering if you want the best chances of reducing the unwanted frequency without affecting the voice.

Not listening!

 filming headphones

Despite what anyone may tell you I am a good listener!

Pretty self explanatory, really!

Solution: Always wear a decent pair of headphones and be prepared to playback takes if you can to ensure you’re recording the cleanest sound possible. Other things to listen out for include unsuitable gaps between questions and answers in an interview (you need room to cut), spikes in the audio from background noise (the consistent sound of traffic may be OK but a siren will stand out) and interference.

If you have even the slightest doubt about your recording, go for another take if you can. You will thank yourself in the edit.

 

These tips are just the beginning and should only be the start of your research into sound recording. However, by taking these points on board and applying them to your productions you should start to see a noticeable improvement in your audio. Plan as much as you realistically can, be prepared for the unexpected and when scheduling allow for interviews and pieces to camera to take a bit longer so you can get it right the first time.

5 tips for shooting better interviews

Interviewing: an essential skill in video production

Interviewing: an essential skill in video production

Here at flycreative we know a thing or two about filming interviews. Interviews are the heart of many video productions and most corporate, event and documentary shoots will at some point involve someone speaking to the camera in depth about a subject. Whether the topic is eCommerce or the plains of Nebraska, it is our job as video production professionals to capture and create engaging content, regardless of our knowledge of the subject at hand. Whilst the subject may change however, our approach does not and there are some key considerations to be made whenever an interview is approaching.

Being able to conduct an interview is an essential skill for any videographer or producer, but are your skills up to scratch? Here are 5 top tips for shooting better interviews:

1. Location, location, location!

As they say in business, it’s all about location, location, location. This is important aesthetically as well as practically. Here are some things to consider when deciding on a location:

  • Background – What is it? Does it portray your subject in a positive light? Are there any brands or logos you should be avoiding?
  • Lighting – Where is the best available light? Do you need or want to bring in your own?
  • Sound – Are you likely to be disturbed? Is there likely to be music or interference here?
  • Practicalities – Do you need permission to film here? Are you causing an inconvenience to the public? Is it safe to be here?

Reccie your location in advance if possible, whether that be a day before or 10 minutes before your client arrives. Any preparation time is useful and being prepared makes you look professional. If you can’t realistically reccie in advance then ask your client to send a couple of photos of the available space. The more you know in advance the more you will be able to select the right equipment for the job – there’s no point lugging around a full lighting kit if you only have 10 minutes with your subject. Food for thought.

It was definitely worth the climb for this background.

Sometimes you just get lucky with a view.

2. Be considerate with your composition.

Make your subject and the frame look flattering. Always shoot at the height of your subject and ensure that their eye line is level. Use the rule of thirds to create a nice composition, allowing space for text if necessary and have your subject angled slightly away from the camera. If your subject is not a professional actor or presenter then you’ll probably find you’ll get superior results having them speak off camera.

Office interview

Level, uncluttered and a suitable eye line. Bob’s your uncle.

Think about your depth of field – lenses with faster apertures will give you shallower depth of field and if shooting outside you will need to use ND so you can stop down your lens and retain a nice bokeh. Don’t let your depth of field get too small however as some people can be quite animated and you’ll want them to stay consistently sharp. If you can, shoot with a high quality prime over a zoom lens for often             increased sharpness, faster apertures and nicer bokeh although there are some excellent zoom lenses out there too.

Finally if you have time, change your framing and conduct the interview again (this works best for shorter interviews and is of course irrelevant if you are shooting 4K where you have the option to pan and scan if your output is downscaled). Giving yourself the option of a medium shot and a close up gives you options in the edit and can really bump up the professionalism of the final product that little bit more.

3. Think about lighting and make time for it.

Good lighting can hide the fact that you may not have the latest hi tech camera and the results can make you look very professional indeed. Even minor lighting adjustments can make a huge difference to the final image:

  • Daylight exteriors: On a sunny day where the lighting is high contrast, consider your subject’s position carefully in relation to where the sun is. Try to avoid flare and over exposure from shooting directly into the sun as well as having your subject squint into the sun! A 5 in 1 reflector can also be useful in many situations here.
  • Night time exteriors: Utilize any lighting fixtures at your disposal such as street lights. Set your white balance carefully and watch out for those street lights appearing too warm! It would also prove useful having a decent flicker free LED (and a twin hot shoe adaptor).
  • Interiors: For interiors you may be faced with certain difficulties such as low light, a mixture of colour temperatures and tight working environments. If you don’t have much lighting equipment or time at your disposal then you can use any incoming daylight to your advantage (although if the weather changes then this may prove difficult for longer interviews). If natural light is being used for your key light then you need to think about your colour temperature and balance to daylight if you require a warm ‘positive’ look to your footage. If tungsten or interior lighting is providing most of your ambient light then consider the use of practical lights to increase interest in the image and overall exposure. If shooting in someone’s home utilize any lamps that they may have.

The key to lighting is obtaining control. Whether that be removing, changing the colour or softening a light source the point is if you have some degree of control then you can stylize your footage in a way that compliments the product and your abilities too! In fact, lighting can sometimes be more important than the camera itself..

IMG_1596

If you want high production values, don’t forget to light.

4. Get good sound (for the love of God).

No one likes bad sound. It is usually the first tale tale sign of an amateur. Here are a few dos and don’ts regarding the matter:

Do:

  • Hire a sound recordist if your budget allows. Giving yourself less responsibility technically allows you to focus on getting results.
  • Use the best mic and cables you can afford.
  • Remember your windshield if filming outside
  • Record externally if you can, especially in studio environments. Quite often you can get cleaner audio on an external recorder than recording in to camera, due to noisy pre amps.
  • Generally aim for maximum levels between -12db and -18db when recording, although this is subject to individual preference. You can amplify somewhat in editing, but once a clip peaks it’s a goner.

Don’t:

  • Ever record using your inbuilt camera mic unless there is an exceptionally good reason. Always use a high quality radio mic or shotgun mic.
  • Record without headphones. Duh!
  • Record if you can hear music in the background. Some background noise at a consistent level can be useable and sometimes removable however.
  • Accept a take if you’re not 100% happy. If in doubt, do it again. You’ll thank yourself in the edit.
  • Let your clients walk off with your radio mics!

Remember, sound is half the picture. Don’t neglect it!

Sennheiser - one of the leading brands for audio equipment.

Sennheiser – money well spent.

5. Plan your questions & listen.

Whether you’re shooting an hour long interview or a dozen vox pops on the fly, you can still plan your questions in advance to achieve optimum results.

Speak to your subject about the question (s) you’ll be asking and find out what they would say in response before you roll the camera. Without the camera recording many people will find the pressure reduced slightly, resulting in more genuine answers (you can also sneakily use this time to do sound checks). When you do start recording your aim is now to get them to repeat what they’ve already said which makes it much easier.

Once the camera starts rolling listen carefully to the answers provided and work with your subject to make sure that what they are saying is relevant and efficiently worded. It’s OK to help them rephrase a sentence if it’s proving to be a bit of a tongue twister. Take notes if you can so that nothing gets repeated. You may get some ideas for cutaways here too.

Don’t forget – if your subject is looking off camera and there is no presenter as such then their answers must always be in full sentences. Make sure they allow a second of silence between your question and their answer and look out for potential cutting points within their answer. If you like the sound of an individual phrase within a sentence get them to repeat it as a standalone line. The beauty of video making is that we can often go for a second take; if in doubt go for it. Give yourself options in the edit!

This interview had all the right ingredients.

This interview had all the right ingredients.

If all of this seems a bit daunting at first, don’t worry. With a bit of practice and application of these techniques the quality of your interviews will increase over time and will gradually become second nature to you. For some inspiration, take a look at some of the interviews we have conducted over the years..

Before you go..
Download our free ebook

Mustard-Education-Video-ebook

7 Steps:
Make your school’s video
content pay for itself

  • How to use your new video to attract attention and get the results it deserves
  • How the most successful independent schools are getting all the new enrolments
  • The techniques that will give you a clear, predictable return on your video investment
  • How to track and record ROI to prove your video strategy’s working